INSTALLATION
Eaton 9135 Two-in-One UPS (5000/6000 VA) User's Guide S 164201726 Rev 3 www.eaton.com/powerquality
26
3. Place the cabinet on a flat, stable surface with the front of the
cabinet facing you.
NOTE You can adjust the position of the mounting brackets.
4. Align the mounting brackets with the screw holes on the side of the
cabinet and secure with the supplied M4
6 mm flat-head screws.
5. If installing additional cabinets, repeat Steps 3 and 4 for each
cabinet.
Figure 6. Installing the Mounting Brackets
To Next Page
Loading...
