INSTALLATION
Eaton 9135 Two-in-One UPS (5000/6000 VA) User's Guide S 164201726 Rev 3 www.eaton.com/powerquality
29
14. Optional. If you installed the rear hold-down brackets, secure the
brackets to the rear rails using two screws for each bracket (see
Figure 10).
Figure 10. Securing the Rear Hold-Down Brackets
15. If you removed the UPS battery tray in Step 2, replace the battery
tray and secure with the battery retaining brackets.
Replace the UPS front cover.
16. Continue to “Installing the UPS” on page 35.
To Next Page
Loading...
