Eaton Sefelec RXS500 User Manual

XS series operating manual
XS user manual v0.55 - 77 -
Parameter memorization
XS series unit allows to store in 10 memories (numbers 0 to 9) measurement parameters (voltage,
threshold, time , ....). From the measurement menu, to modify the memory number:
Press on the [MEM:x] function key
Display shows :
Fig 9.9
With the UP/DOWN arrow keys, increase or decrease the memory number (from 0 to 9). The
parameters recall line (area 3 of the LCD screen) indicates the content of each memory.
Enter the selected memory either by pressing again on the [MEM:x] function key or by pressing the
ENTER key.
From the parameter menu, to modify a memory number :
Press on the [MEM:x] function key
With the UP/DOWN arrow keys, increase or decrease the memory number (from 0 to 9). The input
parameters lines indicate the content of each memory.
Enter the selected memory either by pressing again on the [MEM:x] function key or by pressing the
ENTER key.
WARNING: ANY PARAMETER MODIFICATION IS AUTOMATICALLY STORED IN THE MEMORY

Eaton Sefelec RXS500 Specifications

General

Brand	Eaton
Model	Sefelec RXS500
Category	Test Equipment
Language	English