The maintenance of Eazao Zero should be conducted by skilled person only.Always
unplug the printer before doing maintenance or modifications. In order to have a
smoothly working Eazao Zero it is important to maintain it correctly.Please follow the
safety/ deterioration checks during maintenance:
*Check condition of all rubber belts.
*Oil the lead screens with light machine oil(sewing machine oil).
*Check the condition of the power cable.Make sure there are no cracks in the sheath.
*Check the condition of the wiring on the printer to ensure nothing is pinched of
damaged.
*Check the fans are operational during print.
*Check the chassis is secure.Tighten any screws if there is flex in the frame.
Always store your Eazao Zero in a cool, dry location that is free from dust.
MAINTENANCE
•Safety Goggles
•MaskLong-nose
•PliersWire
•cutters
•sponge
•Glaze
6.1.2 Polishing.
Though Direct Ink Writing (DIW)is capable of producing high quality objects straight out
of the machine, the layer lines will be visible. Sponge dipped in water will reduce these
'step' marks in the model.
1.Ensure that safety goggles and a mask are worn of protection
2.Wipe dry prints with a sponge dipped in water, being careful not to apply force,
otherwise the prints may break easily.
TIP: Glazing can also eliminate layer patterns
6.1.3 Surface Glazed.
Finally, to make tour models more presentable, follow these steps. Before glazing, make
sure that the printed work is dry and the glaze must be shaken evenly.
1. You can use a brush to dip the color into the printed work.
2. It can be poured directly on the work (the color effect is fuller).
3. Use an air pump to spray the glaze onto the work. (Pay attention to protective
measures when spraying glaze, wear gloves and masks to prevent inhalation of dust).
Note:
The glaze is poisonous and do not eat it. Please wear a mask and gloves when
using it. A small amount of skin touch is not harmful to people. Do not touch for a long
time. After the chemical reaction occurs after firing, safety can be guaranteed. Different
glaze types are also compatible with clay. Consult your local glaze supplier for the best
compatibility for your intended purpose.
7.1 Maintenance.
33
To Next Page
Loading...
