Eazao Zero - Table of Contents

INTRODUCTION 1
1.1 What is Ceramic 3D Printing? 1
1.2 From 3D Design to Printed 3D Object. 1
PRODUCT OVERVIEW 3
2.1 Printer Front View. 3
2.2 Printer Rear View. 4
2.3 Printer Side View. 5
2.4 Electric Putter. 5
SET UP 6
3.1 Unboxing and Assembly. 6
3.2 Main Interface. 7
3.4 Home Option. 8
3.5 Extrusion Option. 8
3.6 Leveling Option. 8
3.7 Printing Option. 8
3.8 Settings Option. 8
3.9 Clay Pre-extrusion. 9
3.10 Levelling the print bed. 11
3.10.1 The levelling wizard. 11
3.11 Print checking chart. 12
PRINTING 13
4.1 Printing a file. 13
4.2 Good 3D Printing Practices. 14
4.3 Removing 3D objects from the print bed. 15
4.4 Materials. 15
4.5 Clay. 15
4.6 Storage. 15
4.7 Creating and Printing your own Models. 16
4.7.1 Saving files to SD Card. 16
4.7.2 Creating a GCODE file using Cura. 16
4.7.3 Installing Cura. 16
4.7.4 Adding your Eazao Zero to Cura. 18
4.7.5 Import cura slice configuration file. 20
4.7.6 Loading a 3D design into Cura and slice. 26
SERVICING 30
5.1 Servicing your Eazao Zero. 30
5.1.1 Extruder cleaning. 30
5.1.2 Electric putter cleaning. 30
5.1.3 Extruder diagram. 31
5.1.4 Introduction of electric putter "extrusion" interface. 31
5.1.5 Routine Component Check. 32
Contents