Display 3: To enter display 3, press the button while in display 2. The interface will
display as shown below.
Display 3
Single Maximum Speed (MXS) Real-Time Voltage (VOL)
Once the e-bike is in riding mode, after twenty seconds the single maximum speed will
return to real-time speed (Km/H) as shown below.
To return to display 1, press button.
Display of Powered Motor: When motor is powered, the LCD will display and animate the
following interface to indicate the motor is drawing power. This will only last a duration of 5
- 20 seconds before reverting to display 1. The interface will appear as follows.
To Next Page
Loading...
