Power Walk Function
Users can use power walk function for assistances while walking alongside the e-bike or
riding in crowds. Hold button and the motor will provide power until e-bike reaches 6
Km/H. The LCD assists
function icon will flash indicating the function is active. By releasing the button,
the function will be deactivated.
Cruise Function
When the e-bike is traveling above 7Km/H, hold button for 3 seconds to set the
cruise function. The LCD will display "CRUISE" and "C" to indicate that the cruise function
has been activated (as seen in the figure below). Brake or hold any button to deactivate
cruise. Note: This feature only works if it has been activated through the Parameter
settings (check C7 in Parameter setting).
Backlight
To turn on or off LCD backlight and e-bike, hold button for 3 seconds.
When this function is activated, the display will show sign to indicate it is on.
To Next Page
Loading...
