Automatically Prompt Interface
Error Code Display: When there are issues with the electronic control system of the e-
bike, the LCD will automatically display (flicker) a fault code. This cannot be removed until
fault is fixed. Refer to Error Code & Definition Table for reference.
Motor operating temperature alarm: When the motor operating temperature exceeds the
warning value, the motor operating temperature display flashes to alarm the rider, while the
controller will provide the appropriate protection to the motor.
Error Code & Definition Table:
Motor Hall Signal Abnormality
Torque Sensor Signal Abnormality
Axis Speed Sensor Abnormality
Motor or Controller Short Circuited
To Next Page
Loading...