EBO KT-LCD3 - Default Settings

DEFAULT SETTINGS
Setting
Default Value
Description
P1
46, 87, 100
Motor Gear Reduction Ratio X Rotor Magnets
• Geared 350W/750W Motors - 87
• Geared 500W Motors- 100
• Direct Drive Motors 750W - 46
P2
0, 1, 5, 6
Wheel Speed Pulse Signal Setting
• Gen 1/2 350W Motors - 0
• Gen 3 350W Motors - 1, 5, or 6 (Determined by
number of magnets and HAL sensor model)
• Geared 500W Motors - 1
• Direct Drive Motors - 0
P3
1
Throttle Assist Level Control Setting
P4
0
Throttle Activation Setting
P5
12, 15
Battery Voltage/Capacity Monitoring (36V - 12, 48V - 15)
C1
1
Number of Magnets in Pedal Assist Disc
C2
0
Motor Phase Classification
C3
8
Pedal Assist Level Initialization
C4
3
Throttle Function Settings
C5
8
Controller Current Adjustment
C6
3
Backlight Brightness Adjustment
C7
0
Cruise Control Function
C8
0
Motor Operating Temperature Displayed
C9
0
Password Setting
C10
n
Restore Defaults
C11
0
LCD3 System Version
C12
4
Controller Maximum Voltage Adjustment
C13
0
ABS Brakes and Anti-Charge Control
C14
2
Pedal Assist Tuning Setting
33