EBO KT-LCD3 - C7 Cruise Function Setting; C7 Display; C8 Motor Operating Temperature Display Setting; C8 Display

C7 Cruise Function Setting
The C7 Parameter setting will display on the LCD after C6 settings. The KT-LCD3 will
display as follows:
C7 Display
The cruise function settings can be found in C7. Refer to the following table for definitions
of C7 values.
C7 Value
Cruise Function
0
Disabled
1
Enabled
C8 Motor Operating Temperature Display Setting
The C8 Parameter setting will display on the LCD after C7 settings. The KT-LCD3 will
display as follows:
C8 Display
C8 is settings for the motor operating temperature display. Refer to the following table for
definitions of the C8 values.
C8 Value
Motor Operating Temperature Function
0
Disabled
1
Enabled
25