EBS EBS-230 - Distance between Texts; Row Repetition

 EBS-230 Printer User's Manual
 38 ___________________________________________________ 20080512#1.0
Distance between Texts
The Rep. distance parameter defines the distance between the beginnings of the texts that are
printed repeatedly (
Text repetitions>1). The distance is specified as a number of vertical rows (timed
by a timing system).
Fig. 3.3.9.16.
printing released with the release button
Print delay Rep. distance Rep. distance
direction of motion of object before printer
Example of printing for Text repetitions=3
0
,
... 5
,
7
,
... 14
,
... 34 rows
Fig. 3.3.9.17.
NOTE: If the distance set with the
Rep. distance parameter is smaller than the text length (given as
a number of rows), then the texts will be printed one after another.
!
Row Repetition
The parameter defines how many times printing of each vertical row should be repeated. It applies to
the entire text, no matter how the text file has been created in the text editor or what its contents are.
It is used for intensifying the prints on porous surfaces, which soak up ink heavily, on which printed
characters are poorly visible due to surface granulation, if the characters are built of ink dots of the
same sizes).
Fig. 3.3.9.18.