EBS EBS-230 - Ink Pressure; Using a Number of Texts; Creating a Text Library in the Printer

 EBS-230 Printer User's Manual
20080512#1.0
_____________________________________________________  43
Ink Pressure
The Pressure [Bar] parameter can adjust the force of the dots jetted onto the assigned surface. For
smooth, non-absorptive surfaces, a lower pressure value is recommended, while for porous
absorptive surfaces, a higher one.
NOTE: When pressure is set too low, the ink may cool in the print head. If the pressure is set too
high irregular ink blotting (satelites) may occur around the label.
!
The Pressure [Bar] parameter accepts a value from 0.2 to 0.5 with the increment of 0.1.
This parameter is available in the Parameters 3 box after marking the Adv. options.
Fig. 3.3.10.11.
3.3.11. Using a Number of Texts
You can store up to 30 projects (texts and parameters) in the printer memory. Each project can
contain any of the text elements described previously (such as variable fields, various fonts, etc.).
Creating a Text Library in the Printer
1. In the Project library window, type in the name of a first text and confirm the name with the
V key.
Ö
Fig. 3.3.11.1.
2. In the text edit line create a complete text and set print parameters for the text.
Fig. 3.3.11.2.