EBS EBS-230 - Technical Specifications

 EBS-230 Printer User's Manual
20080512#1.0
_____________________________________________________  61
6. Technical Specifications
Parameter Value
Number of nozzles
7 or 16
Nozzle diameter
standard: 150µm,
optional: 100 µm, 120µm, 200µm.
Height of prints
No head-turning option available:
11 mm for the 7-nozzle printer,
27 mm for the 16-nozzle printer.
Head-turning option available:
6-11 mm for the 7-nozzle printer,
6-27 mm for the 16-nozzle printer.
Working position of the printer any
Number of vertical rows printed at the
same time
1
Number of texts and set of print
parameters stored in the printer memory
at a time
1 to 30 Texts are loaded to the printer via a PC or
T200 terminal.
Maximum number of characters in a text
1300 (includes controller characters for built-in fonts)
Number of characters entered from Windows
®
fonts is
limited – depending on the type and size of a font.
Graphics printing (logos, special graphic
characters)
Ability to edit and print text and graphic symbols with the
application of Windows
®
fonts (True Type fonts) as well
as with a bitmap editor, as standard.
Special characters
National diacritical characters, graphic, warning or
transport characters (a collection of characters
determined by manufacturer), etc.
Special registers (texts with dynamically
changing content based on occurrence of a
specific event)
date and time in any format, expiry dates, incremental
counter, decremental counter,
Editing texts and print parameters,
printer control
• with use of a PC
- Minimum Recommended Hardware Requirements:
IBM PC compatible - Pentium 200 or equivalent, 32
MB RAM, min. 50 MB free disc space on HDD,
- Windows
®
98SE / ME / NT / 2000 / XP / Vista
®
compatible operating system for text edit and print
parameter programs
,
If Windows NT
®
is running on your PC, the printer
communicates with the PC exclusively via an RS-232
interface (not via USB).
• with use of T200 terminal (optional).
Printing timing
Internal generator or a so called shaft-encoder (for
variable speed conveyors)
Power supply (power pack integrated with
R230 cable distributor)
IN: 100-240 V~, 50-60 Hz / 0,66-0,34 A
OUT: 24V , max. 1A