EchoStar DSB-2200 2Ci Viaccess - To Delete a Channel

Section 5 Operation
Page 5 - 4 EchoStar International Corporation
© 2001 EchoStar International Corporation
All rights reserved
1.9. TO DELETE A CHANNEL
1. In the Edit menu, select the LOCK option.
2. Read the available help text for information.
3. Go to the channel you want to lock.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection.
5. If you want to undo the selection, press the OK key
again.
6. Either:
a. press the WHITE key to confirm the lock and
end the session, or
b. select the next channel you want to lock.
7. You can temporarily unlock all channels:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu;
c. Enter the correct PIN-code as requested;
d. Set the channel lock to Off.
8. You can restore all the locks on the channels:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu;
c. Enter the correct PIN-code as requested;
d. Set the channel lock to On.
1. In the Edit menu, select the DELETE option.
2. Read the available help text for information.
3. Go to the channel you want to delete.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection and
the cursor advances to the next channel.
5. If you want to undo the selection, press the OK key
again.
6. Either:
a. press the WHITE key to confirm the deletion and
end the session, or
b. select the next channel you want to delete.