Section 5
Operation
Page 5 - 12 EchoStar International Corporation
© 2001 EchoStar International Corporation
All rights reserved
3.5. TO SELECT THE SUBTITLE LANGUAGE
3.6. TO SELECT ANOTHER SATELLITE
4. TO SET THE USER PREFERENCES
4.1. TO CHANGE THE USER PROFILE
1. On the InfoBanner, find the subtitle symbol.
2. On the RCU, press the key.
3. In the subtitle pop-up menu, select the required
subtitle language.
Note that subtitle information is provided by the
service provider.
4. On the RCU, press the key.
1. On the RCU, press the key.
2. In the Satellites List pop-up menu, select the
required satellite.
3. On the RCU, press the OK key.
Note that the dish moves towards the selected
satellite.
NOTE
FTA (Free-To-Air) receivers have no conditional access capabilities.
If shown, please ignore the Conditional Access button in the main menu bar.
1. On the RCU, press:
a. the MENU key;
b. the key to select the menu;
c. the OK key, to select the menu.
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. On the RCU:
a. press the MENU key to save the settings;
b. press the EXIT key to leave the menu.
To Next Page
Loading...
