EchoStar DSB-2200 2Ci Viaccess - To Set the Local Date and Time

Section 5 Operation
Page 5 - 14 EchoStar International Corporation
© 2001 EchoStar International Corporation
All rights reserved
4.5. TO SET THE LOCAL DATE AND TIME
FOR ECHONAV FIXED - RECEIVER WITH DISPLAY
FOR ECHONAV FIXED - RECEIVER WITHOUT DISPLAY
4.6. TO SET THE DAYLIGHT SAVINGS TIME
FOR ECHONAV FIXED - RECEIVER WITHOUT DISPLAY
NOTE
Make sure the local time is set correctly otherwise you can not view and use the
EPG information because the EPG and the related timers need the correct time.
1. On the RCU, press:
a. the MENU key;
b. the  key to select the menu;
c. the OK key, to select the menu.
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. On the RCU:
a. press the MENU key to save the settings;
b. press the EXIT key to leave the menu.
NOTE
Make sure the local time is set correctly otherwise you can not view and use the
EPG information because the EPG needs the correct time.
1. On the RCU, press:
a. the MENU key;
b. the  key to select the menu;
c. the OK key, to select the menu.
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. On the RCU:
a. press the MENU key to save the settings;
b. press the EXIT key to leave the menu.
1. On the RCU, press:
a. the MENU key;
b. the  key to select the menu;
c. the OK key, to select the menu.
2. Select the summer time option:
a. off for winter time (no daylight savings time);
b. on for summer time (+ 1 hour).
3. Read the available help text for information.
4. On the RCU:
a. press the MENU key to save the settings;
b. press the EXIT key to leave the menu.