Section 5
Operation
Page 5 - 6 EchoStar International Corporation
© 2001 EchoStar International Corporation
All rights reserved
NOTE
After you have set a hide onto a channel, the installation and the EDIT menu are
automatically locked with an installation lock to prevent unauthorized access.
Now you can only access these functions if you know the correct PIN-code.
1. Make the hide function available for edit:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu
c. Enter the correct PIN-code as requested;
2. Set the Master Hide to Off.
1. In the Edit menu, select the HIDE option.
2. Read the available help text for information.
3. Go to the channel you want to hide.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection.
5. If you want to undo the selection, press the OK key
again.
6. Either:
a. press the WHITE key to confirm the hide and
end the session, or
b. select the next channel you want to hide.
7. Makethehidefunctionactive
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu
c. Enter the correct PIN-code as requested;
8. Set the Master Hide to On.
9. You can temporarily unhide all channels:
a. On the RCU, press the MENU key;
b. Select the Parental Lock menu
c. Enter the correct PIN-code as requested;
d. Set the Master Hide to Off.
10. You can restore all the hides on the channels:
11. In the parental lock menu, set the Master Hide to
On.
To Next Page
Loading...
