For
your
safety
in
using
the
CD1200
~CAUTION
•
Wiring
and
installing
this
main
unit
requires expertise and experience. Professional
installation
is
recommended.
Consult
with
your
dealer
or
a
professional
installer.
Incorrect
wiring
may
damage the
main
unit
or
interfere
with
safe vehicle operation.
• Use
only
the
accessory
parts as specified.
Using
other
parts
may
cause damage
to
the
main
unit
or
cause parts
to
dislodge
and/or
detach unexpectedly.
• Do
not
install the
main
unit
in places where
it
may
get
dew
condensation
on
(around the
air
conditioning
hose, etc.), come in
contact
with
water,
or
in
condition
of
high
moisture,
dust
or
oily
smoke.
If
water, moisture,
dust
or
oily
smoke
enters
this
main unit, smoke,
fires
or
malfunctions
may result.
•
Avoid
installing
in places where
it
cannot
be fastened
securely
or
where there are
strong
vibrations.
Also,
if
you
installed the main
unit
with
double-sided tape,
first
wipe
away
dirt
and
wax
from
the installation area. Otherwise,
the
main
unit
may
come
loose
due
to
vibration
while
driving,
causing
problems
for
driving
and
resulting
in
traffic
accidents
or
injuries.
• Do
not
install in places
with
direct
sunlight
or
where
it
will
be
hit
directly
by
hot
air
from
the
heater. This may increase the temperature
of
the
interior
of
this
main unit,
resulting
in
fires
and
malfunctions.
• Do
not
obstruct
the
air
flow
of
the heat
sink
or
vents
of
this
main unit. When the
air
flow
of
the heat
sink
or
vents are
obstructed,
the
interior
overheats, and fires may result.
•
Connect
as specified in the installation manual.
If
not
connected normally, fires
or
accidents
may result.
• When
installing
in
vehicles
eqUipped
with
air
bags,
check
the
manufacturer's
cautions
regarding operation
to
ensure
proper
operation
of
the
airbags.
• Install
wiring
in a
manner
that
will
not
allow
them
to
be
pinched
by
moving
parts, damaged
by
screws,
or
damaged
by
metal parts.
Accidents,
fires
and
shocks
may
result
from
disconnection
and electrical shorts.
•
Avoid
hot
surfaces
when
Wiring
main
unit.
High
temperatures may damage
wiring,
causing
shorts,
arcing
and fires.
• When
changing
the
installation
location
for
this
main unit, please
consult
the dealer
where
you
bought
it
for
safety reasons. Expertise
is
necessary
for
removal and installation.
• Keep
volume
to
a reasonable level
so
that
you
can hear
sounds
from
outside
the
vehicle,
inclUding
warning
sounds,
voices, and sirens. Failure
to
do
so
may cause an accident.
• When an external
amplifier
is
connected,
the
guide
tone
will
not
sound.
• Do
not
put
your
hands
or
fingers
into
the
loading
slot
of
disc
or
USB
input
terminal. Injuries
may
result.
• Do
not
touch
the heat
dissipating
part
of
the amp.
Burns
may
result
from
the heat
of
this
part.
• Do
not
recharge
dry
batteries. Dry batteries may rupture, resulting in injuries.
• Do
not
use batteries
other
than
those
specified.
Also,
do
not
mix
old and
new
batteries.
Injuries
or
pollution
to
the
surroundings
may
result
from
battery
ruptures
and leakage.
4
To Next Page
Loading...
