Various
Settings
Making changes with Function Mode
A variety
of
settings can
be
changed.
Switching
the
Function
Mode
II
Press
the
[FUNCTION] button.
The Menu Selection mode is activated.
I!IPress
the
[SELECT]
button
to
II
select
the
setting
item.
When the button
is
pressed, the
setting item changes
in
the following
order.
EQ Select
~
BEEP ONIOFF
~
DX/LOCAL*1
~
AUX ONI
OFF*2
~
Demo ONI OFF
~
ILLUMINATION
~
EQ Select
..
·
*1: Refer to page
33
for details on
Tuner operation.
*2:
Refer to page 44 for detail
on
AUX
operation.
Making changes
with
Equalizer
Mode
Using
EQ
(Equalizer), you can adjust the
frequency according to the genre
of
the musical
instruments.
a
.
Press
the
[SELECT]
button
to
select
the
EQ select.
BTurn
the
[VOL]
button.
When the button is turned, the setting
item changes in the following order.
EQ OFF
~
Sharp
~
Vocal
~
Power~
Custom
The selected settings will take effect.
38
Setting
guide
tone
(Guide Tone)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled
in
the following
procedure:
a
Press
the
[SELECT]
button
to
select
the
BEEP ON/OFF.
I!ITurn
the
[VOL]
button
to
select
the
II
guide
tone
ON/OFF.
The selected settings will take effect.
rnATTENTION
When an external amplifier is connected, the
guide tone will not sound.
Switching
demonstration
screen
display
(Demo)
Demonstration screen display settings can be
performed. Default setting is ON.
If the demonstration screen display is set to ON,
operation and other screens will
be
displayed
in
succession.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will
be
cancelled and the audio operation
screen will be displayed. If you do not operate
the status display function within
15 seconds, the
display will return automatically to the demo
screen.
a
Press
the
[SELECT]
button
to
select
the
Demo.
I!ITurn
the
[VOL]
button
to
select
the
II
Demo ON/OFF.
The selected settings will take effect.
To Next Page
Loading...
