Listening
to
music
files
in
USB
memory
II
Connect
a USB
memory
using
the
USB
connector.
B
Switch
to
the
USB mode.
For details, refer to "Switching Audio
Modes" on page 14.
II
Operate
the
USB
music
file
player.
The procedure for playing music is the
same as that are used to play CDs.
Refer to "How to operate the CD/MP31
WMAlAAC player" (page 22 - 25).
~ATTENTION
If the USB mode is changed to another mode
and then returned to the USB mode, the player
will return to the preVious file played.
~CAUTION
• Do not disconnect the USB memory
or
turn
the ignition key to ACC OFF position while
accessing the USB memory. Doing so may
corrupt the data.
• Depending on the type connected, the USB
memory may not work
in
some cases.
• The USB memory does not support multi-
partition. Also, it does not support USB hub.
• It
is
highly recommended to back up your
data in case of accidental deletion.
• Install and use the USB device
in
a place
that provides safe operation of the vehicle.
• The music files under the copyright
protection cannot be played.
• When connecting a digital audio player to
the USB connector, additional USB
adaptors may be required.
How
to
operate the USB
music
file
player
Searching
for
a
music
file
You
can retrieve your desired track
in
Search
mode.
II
Press
the
[BAND/ASM]
button.
ij
'-ASM
The search mode is activated.
1:1
Press
the
[BAND/ASM]
button
to
•
iii
select
the
search
mode
item.
,
'-ASM
Search mode items are selected
in
the following order.
Track search
-+
File search
-+
Character search
For
Track
or
File Search
II
Turn
the
[VOL]
button
to
select
the
track
number
and
file
number.
II
Press
and
hold
the
[SELECT]
button.
Playback
of
the selected music file will
begin.
For
Character Search
II
Turn
the
[VOL]
button
to
select
the
character.
II
Press
the
[SELECT]
button
briefly.
The selected character will be
confirmed.
I!I
Repeat
steps
(3)
and
(4)
to
enter
all
iii
of
the
characters.
I!I
Press
and
hold
the
[SELECT]
iii
button.
Playback
of
the selected music file will
begin.
29
To Next Page
Loading...
