Operation
How to use the optional remote control
Precautions
in
use of the remote control
•
Be
careful when handling the control, especially because it is small and light. Dropping or striking it
hard may damage
it,
wear out the battery or cause a malfunction.
• Keep the remote control free of moisture, dust and water. Do not subject it to shock.
• Do not place the remote control unit where it will get hot, such as on the dashboard or near a heater
vent. Allowing the remote control unit to overheat may warp its case or cause other problems.
• Do not operate the remote control unit while driving because doing so could cause an accident.
• When using the remote control, point it toward the remote control light receptor.
• The light receptor may not operate correctly if it is exposed to bright light such as direct sunlight.
• Remove the batteries from the remote control unit whenever it is not to be used for a long time.
Cleaning the remote control
• Use a dry cloth to keep the remote control clean. If the remote control unit gets extremely dirty, clean
it with a cloth lightly moistened with diluted liquid detergent.
•
In
no event should alcohol, benzine or thinner be used. These substances will damage the case or
finish.
Remote
control
(RMC-105)
No. Button NamelWorking
[PWR]
button
CD
Turns main unit power
ONI
OFF.
®
[TU]
button
@)
Switches to tuner mode.
@
[BAND]
button
Switches radio band.
PRESET
CH
I
DISC
@
@
@
[4) ]
button
ci
~~:.
Decreases the volume.
-
TRACK
-
[MUTE]
button
®
)J
PRESET
CH
I
DISC
Activates and deactivates
mute.
34
To Next Page
Loading...
