Eclipse CD1200 - How to Operate the AUDIO CONTROL; Switching Audio Control Modes

Various Settings
How to operate the AUDIO CONTROL
Switching audio control modes
Various audio control modes may be fine-tuned using this procedure.
a
Press the [SELECT] button for less than one second to select the item to be
adjusted.
Modes will switch
in the order shown below each time the button is pressed.
BASS
~ MID ~ TREB ~ BAL~ FAD~ LOUDNESS~ VOL~ BASS ...
Rotary Mode (Turn the [VOL] button)
Mode Function
Left Right
BASS Adjusts bass level.
Decrease level Increase level
MID
Adjusts middle level.
Decrease level Increase level
(MIDDLE)
TREB
Adjusts treble level.
Decrease level Increase level
(TREBLE)
FAD
Adjust front/rear speaker balance. Decrease level Increase level
(FADER)
BAL
Adjust left/right speaker balance. Decrease level
Increase level
(BALANCE)
The loudness control may be turned
on to emphasize low and high
Select OFF Select
ON
LOUDNESS
frequencies at low volume levels.
Loudness boosts bass and treble at
low volumes.
36