About
optional
unit
Others
Connecting
portable
audio
players
to
the
AUX
jack
Use a commonly available accessory cable with
the RCA connector to connect a portable audio
player to the AUX (auxiliary) jack
of
this system.
The default setting for AUX is
OFF.
II
Turn
on
the
portable
audio
player
and
start
its
play
function.
The AUX mode is activated.
For details, refer
to
"Switching Audio
Modes"
on
page 14.
rnATTENTION
• While the
AUX
mode is activated, actions
such as turning off the audio player
or
pulling out the connection cord may cause
noise spikes that can
damage
the system
speakers. Be sure to avoid this possibility
by turning off system power
or
switching
from AUX mode to
another
mode before
shutting off
or
disconnecting the portable
audio player.
• Audio output levels will differ for the various
devices that can be connected by this
method. Carefully adjust volume until the
output level
of
the connected player is
known.
• Before using a portable audio player in a
vehicle, read the player's operation manual
carefully and confirm problem-free
operation in the vehicle before proceeding.
44
Switching
the
AUX
mode
on
and
off
IIPress
the
[FUNCTION]
button.
The function mode is activated.
I!IPress
the
[SELECT]
button
to
iii
select
the
AUX ON/OFF.
The AUX ON/OFF mode is activated.
II
Turn
the
[VOL]
button
to
select
the
ON/OFF mode.
It switches between
ON
and OFF each
time the button
is
turned.
The selected settings will take effect.
To Next Page
Loading...
