20
Basic operation
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
When the vehicle has no ACC position on the ignition switch, care is
needed when turning off the deck. Follow Step 2 or Step 3 when
turning off the power.
Turning the power on and off.
Turning the power on and off
When power is OFF, press [PWR] button.
1
The power will come ON.
When power is ON, press the [PWR] button for less than
two seconds.
2
The power will go OFF and the deck will be in Standby.
When power is ON, press the [PWR] button for more
than two seconds.
3
The power will go completely OFF.
This section covers basic operating procedures. For additional
details, please refer to the sections on specific functions.
If a car is not equipped with an ACC position (for example, a
European car), keep the [PWR] button depressed for more than
two seconds.
Basic operation
[PWR] button
To Next Page
Loading...
Need help?
General
