65
How to use an optional NOB remote control
DISC
BAND MODE
MUTE
ILLUMI
PWRE-COM
TRACK
TUNE SEEK
P
U
S
H
-
M
O
D
E
[ TUNE•SEEK ] buttons
[ DISC ] buttons
[BAND] button
Selecting a station (manually or automatically)
A short press of the button will allow manual station tuning.
Pressing for more than one second will start automatic tuning.
Press the [ TUNE•SEEK ] button.
[ ] button: Tunes to higher frequency stations.
[ ] button: Tunes to lower frequency stations.
How to play CDs
Switching disc modes
Press the [BAND] button.
When one or two CD changers are connected, press the
[BAND] button to change modes from CD player ➔ CD
changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no discs
loaded.
Select the disc mode first.
Selecting preset stations
A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
“Manually setting stations into memory,” page 52.)
Press the [ DISC ] button.
[ ] button: Selects the next higher number preset button.
[ ] button: Selects the next lower number preset button.
To Next Page
Loading...
Need help?
General
