40
How to operate the CD player
[SEL]
button
Changing a previously set title
Press the [FUNC] button while in the Disc mode.
1
Press either [SEL] or [FAST ] button to move the cursor
to the position in the title for inserting or changing
characters.
4
[SEL] button: Moves the cursor to the right.
[FAST ] button: Advances the cursor to the left.
Turn the [SEL] button to the left or right to select
characters.
5
Turn to the right: Advances the character forward in its type.
Turn to the left: Moves the character backward in its type.
If external CD changers are connected, a previously set title for a CD
will be changed in the same way. It is assumed here that the disc
mode is selected.
Turn [SEL] button to select DISC TITLE.
2
The disc title setting mode is activated.
Press the [SEL] button.
3
To leave a space blank, follow these steps.
1.Select and flash the space to be blank.
2.Turn the [SEL] button to make a blank space flashing.
3.Press the [SEL] button to move.
Press the [RTN] button.
6
Press the [FUNC] button to exit Function Mode.
7
At this time, other adjustments can also be made in Function
Mode.
The CD title entry process is now completed.
[FAST ] button
[RTN] button[FUNC] button
To Next Page
Loading...
Need help?
General
