82
How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
82
Fine-tuning EQ functions
1.
After pressing the [FUNC] button, tap
button [2]
until
the desired equalizer mode is displayed.
2. Hold
button [2]
down for more than one second.
The EQ adjustment mode starts.
Press the [MODE] button only when a Digital Sound
Processor is connected to switch to [FRONT] or
[REAR].
Pressing the button repeatedly leads to switching in the
order of Front+Rear (not adjustable) Front Rear.
3.
Tap the [AUDIO CONTROL] button to switch
frequencies.
The frequencies will switch in the following sequence:
4. Turn
the [AUDIO CONTROL] button to adjust the level.
Right : Increases the value.
Left : Decreases the value.
To Next Page
Loading...
Need help?
General
