How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected
Setting the position mode
If the position of the listener's seat is set, the time required
for the sound to reach the listener from the speaker is
adjusted so that more natural reverberating orientation can
be obtained. In this unit, six positions can be set.
1. Press the [FUNC] button.
2. Each time button [4] is pressed less than one
second, the setting is switched in the following
order.
If POS ALL-H is selected, the condition of arranging
speakers around the listener wherever he is seated is
created by optimizing signals output from each speaker
for each seating position so that live-music like sound
can be enjoyed.
POS RIGHT
POS LEFT
POS FRONT
POS REAR
POS ALL
POS ALL-H
POS DEFEAT
3. Press the [FUNC] button to cancel the function
mode so that the settings are enabled.
To Next Page
Loading...
Need help?
General
