ECOFOREST ecogeo basic - Default Values; Change Password

Technical service manualecoGEO
32
EN
2.16. Default values
Initialization
1. Used to delete the settings in the USER and INSTALLER menus and restore default
factory settings.
Delete counters
1. Used to delete the energy counter history log.
Configure inverter
1. Used to configure the compressor inverter. Performed automatically after starting the
configuration.
Note: This option is only available for heat pumps with Danfoss compressors.
2.17. Change password
New password
1. Used to change the password to access the INSTALLER menu (PW1).
Installer menu
5/
dAlarm log
eDefault values
fhange password
5/ Initialization
Delete user settings
and set default
values:
NO
Energy meters
eset energy
meters: No
NO
5/ Initialization
Delete user settings
and set default
values:
NO
Installer menu
/
dLog alarm
eDefault values
fhange password
/ New password
Insert new
installer (PW):

password