Ecotechnics SUN ECK TWIN 12 - Page 48

INSTRUCTIONS MANUAL
-49-
Disconnect LP coupling from A/C system, them press ENTER to continue:
The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
You are asked to enter the vehicle's PLATE, the FRAME NUMBER, the KM/Miles and the
Operator Code. Press ENTER.
A summary of the amount gas of the CHARGE phase is displayed.
Press the symbol
for printing (Optional)
CHARGE procedure completed successfully, press ENTER to return to the manual procedure
page.
ENTER
DD/MM/YY XX:XX PM
-
-
-
123456
Plate:
VIN:
Miles:
Operator code:
EMPTY HOSES
Hoses pressure 4.0bar
STOP
DD/MM/YY XX:XX PM
EMPTY HOSES
END of procedure
Gas charged: 200 g
Press ENTER to continue
DD/MM/YY XX:XX PM
ENTER
CHARGE AMOUNT
ENTER
DATABASE