Ecotechnics SUN ECK TWIN 12 - Mixture Test (N2+H2)

INSTRUCTIONS MANUAL
-69-
Unscrew and disconnect HP and LP coupling from A/C system end press ENTER to complete
the N2 TEST.
WARNING: Connect nitrogen supply only to the quick-connect coupling.
MIXTURE TEST (N2+H2)
This operation allows to test the seal of the A/C system using pressurized mixture N2+H2
Selecting Mixture test (N2+H2) the following screen will be displayed:
Connect and open HP and LP coupling to A/C system, then press ENTER to continue; the
following screen will be displayed:
Connect mixture bottle and press ENTER:
DD/MM/YY XX:XX PM
ESC
Disconnect N2 bottle and press ENTER to
continue
NITROGEN TEST (N2)
ENTER
DD/MM/YY XX:XX PM
ENTER
ESC
Connect and open HP and LP couplings
To A/C system and press ENTER to continue
MIXTURE TEST (N2+H2)
DD/MM/YY XX:XX PM
ESC
Connect N2+H2 bottle and press ENTER to
continue
MIXTURE TEST (N2+H2)
ENTER