INSTRUCTIONS MANUAL
-66-
EMPTY HOSES
From MAINTENANCE, select EMPTY HOSES, the following screen will be displayed:
Make sure that HP and LP couplings are disconnected from A/C system.
The machine will recover all the refrigerant into the service hoses; then the machine will sound
and alarm and the following screen will be displayed:
Press ESC to return to the MAINTENANCE MENU; EMPTYING HOSES is now successfully
completed.
NOTE: Periodically check the tightening of the LP and HP couplings to service hoses and of
the service hoses to the unit
Make sure that HP and LP couplings are
Disconnected from A/C system
End of procedure
Press ESC to exit.
EMPTY HOSES
Hoses pressure 4.0bar