Ecotechnics SUN ECK TWIN 12 - MAINTENANCE: COMPONENT REPLACEMENT AND FLUID HANDLING; CHANGE OIL CONTAINER

INSTRUCTIONS MANUAL
-97-
CHANGE OIL CONTAINER
From MAINTENANCE scroll to page 2 with the arrow
and select CHANGE OIL
CONTAINER, the following screen will be displayed:
This procedure is needed when changing oil, to remove traces of previous oil from the pipeline.
From MAINTENANCE, select CHANGE OIL/UV CONTAINER, the following screen will be
displayed:
Select container to substitute, then press ENTER, the following screen will be displayed:
Make sure that HP and LP coupling are disconnected from A/C system or else and press
ENTER:
Remove the old container and replace it with the newer one already filled, then press ENTER
to begin oil drain procedure, the following screen will be displayed:
DD/MM/YY XX:XX PM
ENTER
ESC
Remove the old container and replace it with
the newer one already filled
Then press ENTER
CHANGE OIL CONTAINER
DD/MM/YY XX:XX PM
ENTER
ESC
Make sure that HP and LP couplings are
Disconnected from A/C system
CHANGE OIL CONTAINER
DD/MM/YY XX:XX PM
ENTER
ESC
CHANGE OIL CONTAINER