mode. It is possible that your network is not listed when Wi-Fi Scan is
performed. Press button and restart Wi-Fi Scan, this will usually solve
the problem.
Only after connect to WLAN you can upload the data to weather website. If
the Wi-Fi network connects successfully, the icon will show on the
left top of the console display. If the data upload to Wunderground.com
successfully, the icon will show on the left top of the console display.
If the Wi-Fi network you would like to connect is with a hidden SSID,
please follow below steps to connect:
1) Press to select Hidden SSID setup, and press key
directly to enter.
2).Press to highlight the SSID. Press to display the keyboard and
enter your SSID. Press to scroll to the character and
press to enter the character. Press to return to the setup page.
3). Press to highlight the Password. Press to display the
keyboard and start to enter your password.. Press to
scroll to the character and press to enter the character. Press to
return to the setup page.
4).Press to highlight the “OK” button beside “Connect ” to start
connecting.
To Next Page
Loading...
