55
Video Off Option (Suspend --> Off)
This option defines if the video is powered down when the
system is put into suspend mode.
Video Off Method (DPMS Support)
This item defines how the video is powered down to save
power. This item is set to DPMS (Display Power Management
Software) by default.
Switch Function (Break/Wake)
This option enables you to specify the function of the power
button:
• Disabled: The power button functions as a normal power
button.
• Break/Wake: The power button functions as a suspend
button. When the button is depressed, the system enters
a suspended state until the button is again depressed to
return the system to normal operating status.
MODEM Use IRQ (3)
If you want an incoming call on a modem to automatically re-
sume the system from a power-saving mode, use this item to
specify the interrupt request line (IRQ) that is used by the mo-
dem. You might have to connect the fax/modem to the
mainboard Wake On Modem connector for this feature to work.
Hot Key Function As (Power Off)
This option allows you to set the Hot Key functionality to one
of the following states: Disable (turn off Hot Key functionality),
Power Off, Suspend.
Hot Key Power on Function (Disabled)
This option allows you to set the Hot key functionality to power
on the system.
HDD Off After (Disable)
The IDE hard drive will spin down if it is not accessed within a
specified length of time. Options are from 1 Min to 15 Min and
Disable.
Power Button Override (Instant-Off)
To Next Page
Loading...
