H100N Pulse Oximeter User Manu EMC Information
- 105 -
Appendix II EMC Information
Guidance and Manufacture’s Declaration
Refer to the following tables for specific information
regarding this device’s compliance to IEC/EN
60601-1-2.
A2.1 Electromagnetic Emissions - for all
EQUIPMENT and SYSTEMS
Guidance and manufacturer’s declaration –
electromagnetic emissions
The oximeter is intended for use in the electromagnetic
environment specified below. The customer or the user of the
oximeter should assure that it is used in such an environment.
Emissions test Compliance
Electromagnetic
environment
-guidance
To Next Page
Loading...
