EDAN H100N - Data Storage: off; Patient ID no

H100N Pulse Oximeter User Manual Oximeter Operation
- 63 -
3.3.13 Patient ID No. setup
The oximeter can support 100 patient IDs, and 300-hour
data storage.
When entering the menu, press the Function button to
set ID (valid range is from 1 to 100). The ID display box
on the interface will change from real line to broken line.
After choosing ID, press the Function button to confirm
the setup. If the ID exists, the following confirmation
dialog box will pop up.
Figure 3-13 Confirm to cover data
3.3.14 Data Storage
Choose Data Storage, and set it to ON, then the
measurement data can be stored.