H100N Pulse Oximeter User Manual Oximeter Operation
- 51 -
button.
3.3.2 Patient Type
Patient Type can be set to Adult (Adu) or Neonate (Neo)
for different measurement modes.
Set Patient Type to Adu or Neo, and confirm it by
pressing the Function button.
3.3.3 Alarm Volume
Alarm Volume is used to adjust alarm volume and its
range is from 1 to 5.
When Alarm System is ON, if a low alarm, a medium
alarm or a high alarm occurs, the oximeter sounds beep.
3.3.4 Pulse Volume
The user can turn on or off the pulse volume by pressing
Pulse Volume, and change volume level to 1, 2, 3, 4, 5
or OFF. Press the Function button to enter setup state
and use the Up Arrow or Down Arrow button to choose
To Next Page
Loading...
