H100N Pulse Oximeter User Manual Oximeter Operation
- 50 -
respectively.
2 The PR
Hi Alarm and PR Lo Alarm stand for
the upper and lower alarm limits of PR respectively.
3 The Temp
Hi Alarm and Temp Lo Alarm
stand for the upper and lower alarm limits of Body
temperature respectively.
4 If the user changes the default value of Lo
Alarm or Hi Alarm, after restarting the oximeter,
the value will resume to the default value for
corresponding patient type.
3.3.1 System Mode
There are two items for selecting:
Large numeric mode
Waveform mode
Then confirm the selection by pressing the Function
To Next Page
Loading...
