H100N Pulse Oximeter User Manu Maintenance
- 85 -
6 Maintenance
The oximeter does not require calibration.
If the service is necessary, contact qualified service
personnel or your local the manufacturer representative.
Before using the oximeter, do the following:
Check if there is any mechanical damage;
Check if all the outer cables, inserted modules and
accessories are in good condition;
Check all the functions of the oximeter to make
sure that the oximeter is in good condition.
If you find any damage on the oximeter, stop using the
oximeter on the patient, and contact the biomedical
engineer of the hospital or Customer service
immediately.
The overall check of the oximeter, including the safety
check, should be performed only by qualified personnel
once every 6 to 12 months, and each time after fix up.
To Next Page
Loading...
