H100N Pulse Oximeter User Manu Performance Considerations
- 84 -
If interference due to patient activity presents a problem,
try one or more of the following to correct the problem:
Verify that the OxiMax sensor is properly and
securely applied.
Move the OxiMax sensor to another site.
Use an adhesive to the OxiMax sensor.
Use a new the OxiMax sensor with fresh adhesive
backing.
Keep the patient still, if possible.
If interference due to poor perfusion presents a problem,
consider using the MAX-R OXIMAX sensor or the
MAXFAST OXIMAX sensor. The MAX-R OXIMAX
sensor obtains measurements from the nasal septal
anterior ethmoid artery, an artery supplied by the internal
carotid. These OXIMAX sensors may obtain
measurements when peripheral perfusion is relatively
poor.
To Next Page
Loading...
