EDAN H100N - Oximeter Operation; Turning on the Oximeter

H100N Pulse Oximeter User Manual Oximeter Operation
- 41 -
3 Oximeter Operation
3.1 Turning on the Oximeter
The oximeter is turned on by pressing the on/off button,
it will cycle through a Power-On-Self-Test (POST)
before displaying valid data values. Verify that all the
circuitry and functions of the oximeter work properly
during the POST. It needs a few seconds to complete the
verification procedure POST.
If it functions incorrectly,
do not use the oximeter.
Press the On/Off button for one second to turn on the
oximeter.
 At first the Logo EDAN is shown.