H100N Pulse Oximeter User Manual Safety Information
- 10 -
WARNING
35 The temperature sensor should be disinfected
after each measurement. The probe must not be
sterilized in steam. Only detergents containing no
alcohol can be used for disinfection.
36 The temperature sensor should not be heated
above 100 (212 ). It should only be subjected to ℃℉
temperatures from 80 (176 ) ℃℉to 100 (212 )℃℉.
37 The calibration of the temperature module is
necessary for every two years (or as frequently as
dictated by your Hospital Procedures Policy). When
you need to calibrate the temperature measurement,
please contact the manufacturer.
To Next Page
Loading...
