Chapter 29
| DHCP Commands
DHCP Server
– 900 –
Example
The following example leases an address to clients using this pool for 7 days.
Console(config-dhcp)#lease 7
Console(config-dhcp)#
netbios-name-server This command configures NetBIOS Windows Internet Naming Service (WINS) name
servers that are available to Microsoft DHCP clients. Use the no form to remove the
NetBIOS name server list.
Syntax
netbios-name-server address1 [address2]
no netbios-name-server
address1 - Specifies IP address of primary NetBIOS WINS name server.
address2 - Specifies IP address of alternate NetBIOS WINS name server.
Default Setting
None
Command Mode
DHCP Pool Configuration
Usage Guidelines
Servers are listed in order of preference (starting with address1 as the most
preferred server).
Example
Console(config-dhcp)#netbios-name-server 10.1.0.33 10.1.0.34
Console(config-dhcp)#
Related Commands
netbios-node-type (901)
To Next Page
Loading...
Need help?
General