Chapter 24
| Multicast Filtering Commands
MLD Snooping
– 715 –
show ipv6 mld
snooping statistics
This command shows MLD snooping protocol statistics for the specified interface.
Syntax
show ipv6 mld snooping statistics
{input [interface interface] |
output [interface interface] |
query [vlan vlan-id] |
summary interface interface}
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-26/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN ID (Range: 1-4094)
query - Displays MLD snooping query-related statistics.
Default Setting
None
Command Mode
Privileged Exec
Example
The following shows MLD snooping input-related message statistics:
Console#show ipv6 mld snooping statistics input interface ethernet 1/1
Input Statistics:
Interface Report Leave G Query G(-S)-S Query Drop Join Succ Group
--------- -------- -------- -------- ------------- -------- --------- ------
Eth 1/ 1 4 0 0 0 0 0 2
Console#
Table 132: show ipv6 MLD snooping statistics input - display description
Field Description
Interface The unit/port or VLAN interface.
Report The number of MLD membership reports received on this interface.
Leave The number of leave messages received on this interface.
G Query The number of general query messages received on this interface.
G(-S)-S Query The number of group specific or group-and-source specific query
messages received on this interface.
Drop The number of times a report, leave or query was dropped. Packets may
be dropped due to invalid format, rate limiting, packet content not
allowed, or MLD group report received.
To Next Page
Loading...
Need help?
General