Chapter 24
| Multicast Filtering Commands
MVR for IPv6
– 765 –
The following example shows detailed information about a specific multicast
address:
Console#show mvr6 domain 1 members ff00::1
MVR6 Domain : 1
MVR6 Forwarding Entry Count :1
Flag: S - Source port, R - Receiver port.
H - Host counts (number of hosts join the group on this port).
P - Port counts (number of forwarding ports).
Up time: Group elapsed time (d:h:m:s).
Expire : Group remaining time (m:s).
Group Address VLAN Port Up time Expire Count
------------------------------ ---- ----------- ----------- ------ --------
ff05::101 2 00:00:03:18 2(P)
2 Eth1/ 2(S)
1 Eth1/ 4(R) 0(H)
Console#
show mvr6 profile This command shows all configured MVR6 profiles.
Command Mode
Privileged Exec
Example
The following shows all configured MVR6 profiles:
Console#show mvr6 profile
MVR6 Profile Name Start IPv6 Addr. End IPv6 Addr.
-------------------- ------------------------- -------------------------
rd ff01::fe ff01::ff
Console#
Table 148: show mvr6 members - display description
Field Description
Group Address Multicast group address.
VLAN VLAN to which this address is forwarded.
Port Port to which this address is forwarded.
Up time Time that this multicast group has been known.
Expire The time until this entry expires.
Count The number of times this address has been learned by MVR (MLD
snooping).
To Next Page
Loading...
Need help?
General