Edge Juice/Attitude - Juice Module Installation

INSTALLATION
Installation Instructions
22
Ford Juice
TABLE OF CONTENTS INTRODUCTION INSTALLATION OPERATING INSTRUCTIONS APPENDIX
TABLE OF CONTENTS INTRODUCTION INSTALLATION OPERATING INSTRUCTIONS APPENDIX
J U I C E M O D U L E I N S T A L L A T I O N
JUICE MODULE INSTALLATION
Figure 5 - Securing JAB
(Looking from the front of the truck to back)
Zip Ties
Fire Wall
Overhang
JAB Assembly
To CS/CTS
To Juice
FINAL JUICE MODULE INSTALLATION
1. Plug the “Main Juice Connector” into the “Juice Module” re-
ceptacle. (Figure 1)
Main Juice
Harness
Juice
Module
Figure 1 - Juice Module
MOUNTING AND SECURING THE JUICE
1. Attach one side of each Velcro strip to the back side of the Mod-
ule and to the top side of a fl at surface under the hood.
(NOTE: The best place is the top of the fuse box on the driver
side. This will secure the Juice module and help keep it away
from any moving or hot components under the hood.)