IMPORTANT NOTES
1. If you have used another tuner/programmer on
your truck, you will need to program your truck
back to stock before using the Attitude or Juice.
Failure to return to stock may result in PCM failure or engine
damage.
2. Programming your vehicle may expose existing defects in your
vehicle’s PCM that could disable your vehicle. It is advised that
you do not program your vehicle in remote location in case of
vehicle failure.
3. All Edge modules and programmers are built to operate with
OEM calibrations. When you take your vehicle to a service center
they may, by your request or otherwise, update your vehicle’s
calibrations. Therefore it is important that you return your vehicle
to stock before taking it in for service. Edge updates its active
products (i.e. those currently being manufactured) to work effec-
tively with updated OEM calibrations. However, this process can
take some time as Edge is not always made aware of calibration
changes made by the OEM. In the case of discontinued products,
Edge cannot ensure that your unit will work effectively if you take
your vehicle to a dealership and you are given, by your request or
otherwise, a new calibration.
4. For specifi c information regarding horsepower, torque, and other
features available for this product:
(1) Go to www.edgeproducts.com
(2) Type the part number of your product in the “KEYWORD/
PART# SEARCH” and press enter.
(3) Click the link under “Description”
(4) Scroll down to the “DOWNLOAD VEHICLE SPECIFIC
HORSEPOWER, TORQUE, AND FEATURES CHART” link
and click on it.
(5) Find the information that is specifi c to your make and model.
To Next Page
Loading...
