USING THE JUICE
Refer to the CS/CTS User Manual for detailed descriptions on how
to operate the Attitude Monitor.
EGT’s
EGT stands for exhaust gas temperature, and is the single most
important indicator of how a diesel engine is performing. Unlike
a gasoline motor, a diesel motor will continue to make power as
more fuel is added. As more fuel is added, the engine heat will
also increase. Please be aware of the limitations of a stock engine.
ENGINE CODES
As with many aftermarket electronic performance modifi cations
available for the Ford 7.3L Power Stroke® Diesel engine the Ford
7.3L Edge Products Juice module for the Ford 7.3 Power Stroke®
Diesel engine will likely set engine “codes.”
The engine codes are generally set during heavy acceleration.
Although the codes will remain “set” in the PCM, the dash board
indicator light should turn off within 15 minutes. Most codes that
are set under hard acceleration are called “soft codes”. These soft
codes are retained in the PCM and can be erased by using the Edge
Products CS/CTS to clear the codes.
Codes that may be set:
• P1211 – Injector control pressure is different than expected
• P1209 – Peak injection pressure fault
OPERATING THE ATTITUDE MODULE
ADDITIONAL JUICE/ATTITUDE INFORMATION
To Next Page
Loading...
