127
Edit Radio Settings:
Enable or disable the AP’s 2.4GHz or 5GHz wireless radio.
When disabled, no SSIDs on that frequency will be active.
Select the wireless standard used for the AP. Combinations of
802.11b, 802.11g, 802.11n & 802.11ac can be selected.
Enable/disable auto channel selection. Auto channel selection
will automatically set the wireless channel for the AP’s 2.4GHz
or 5GHz frequency based on availability and potential
interference. When disabled, select a channel manually.
Select sensitivity of Auto Pilot.
Select a range from which the auto channel setting (above)
will choose a channel.
Specify a frequency for how often the auto channel setting
will check/reassign the wireless channel. Check/uncheck the
“Change channel even if clients are connected” box according
To Next Page
Loading...
Need help?
General
